Call Now at | +91-9873630785               INTERNATIONAL STUDENTS Toll Free Number - 1800-200–4051

Technician Course


Courses after 10th 12th

Courses after 10th & 12th: - Sofcon India Private Limited offers 100% Job oriented 2 months Technical training programs for 10th or 12th pass students. As per the need of present Industrial requirements & lack of skilled manpower, Sofcon in collaboration with NSDC (National Skills Development Corporation of India), Ministry of Skill development & Entrepreneurship, a Gov. of India Enterprises provides Hands-On practical training with 100% Job & guaranteed placement assistance with a target of over 100000 placements till 2020. Sofcon is already linked up with the top most industries across India & posses excellent placement records of over 50,000 placements. The purpose of the course is to provide skilled training fulfilling the basic needs required for placement “Hunar hai to Kadar Hai” to increase the employability ratio of India.

There are two courses offered by Sofcon specifically designed & approved by NSDC for 10th or 12th pass out students, details of which are mentioned below:-

NSDU_IconJOB ORIENTED Electrical Assembly Operator- Two months course

Category: – 100% Job Oriented Electrical Assembly Operator Training Course under the aegis of National Skill Development Corporation of India (NSDC), Ministry of Skill development & Entrepreneurship, Gov. of India Enterprises.

About The Course: – This course provides exposure in assembling and maintenance of Electrical System, wiring Schema and Networking in industrial premises as per the requirement. This course comprises Assembling of Electrical wiring and drawings, maintaining proper electrical wiring schema, electrical fault detection and removal etc. This course is a practical ‘Hands-On’ Training on wiring Drawings of control panel, Assembling electrical network and systems, PLC and HMI components, AC Drives and soft starters, Motors generators, electrical switches, Different Cable specifications,electrical safety measures, Troubleshooting etc. Course also includes Personality Development, Resume Develop, & Mock Interview Sessions.

Course Coverage:-

Understanding Basics of Electrical & Electronics
Wiring Drawings of Control Panels
Electrical Safety
Tools & Equipment
Maintaining a Control Panel
Cable Glands (Single Compression /Double Compression)
Testing Pushbuttons, Indicating Lamps & Selector Switches, Limit →Switches, Proximity Switches etc
Identifying Faulty Components
Basic PLC & HMI Components
Fundamentals of Motors , Generators & Starters
Workplace Asset Management
Concepts of Maintenance & TPM
Co-ordination & Communication Skills
Workplace Health & Safety

Apply now

NSDU_IconJOB ORIENTED Wireman Control Panel Training – 2 Months cource

Category: – 100% Job Oriented Wire-man Control Panel Training Course under the aegis of National Skill Development Corporation of India (NSDC), Ministry of Skill development & Entrepreneurship, Gov. of India Enterprises.

About The Course: – This course provides exposure in control panel wiring, connections and Networking in Industrial Environment. This course comprises maintenance and wiring of control panel’s. This course is a practical ‘Hands-On’ Training on wiring drawings of control panel, Achieving productivity, quality and safety standards, Basics of PLC and HMI components, Basics of AC Drives and soft starters, Professional skills, Knowledge of tools and equipment’s, Different Cable specifications, electrical safety measures, workplace asset management etc. Course also includes Personality Development, Resume Develop, and Mock Interview Sessions.

Course Coverage:-

Understanding Basics of Electrical & Electronics
Wiring Drawings of Control Panels
Electrical Safety
Tools & Equipment
Wiring a Control Panel
Identifying Faulty Components
Basic PLC & HMI Components
Fundamentals of Motors, Generators & Starters
Basics of AC Drives & Soft starters
Professional Skills
Co-ordination & Communication Skills
Workplace Health & Safety

Apply nowWhy to Choose Sofcon: –

  • Sofcon has its own Industrial Solutions Company with Industrial projects running across India.
  • Our experienced trainers are best in the training industry having experience of both Projects and Automation Technology.
  • Our Labs are fully equipped with PLC’s, Panels, Motor Drives, Sensors, Actuators, etc.
  • Over 50,000 Engineer’s Trained and Placed.
    100% Placement Assistance.

Apply now

Courses after ITI

Courses after ITI:- After completing ITI students can develop their career in the field of Automation Industry as a Technical assistant/Technicians as per the needs of various automation industries. Ministry of Skill Development & Entrepreneurship, Gov. of India initiates multiple Job oriented training programs to fulfill various industrial needs. Sofcon India Private Limited is an NSDC approved training company provides turnkey automation training for unskilled manpower to enhance the overall employability ratio of India. The details of the courses offered particularly for ITI students are as follows: – Thiscourseisintendedforthestudentfrom

NSDU_IconJOB ORIENTED Site Engineer Control Panel Training under NSDC

Category: – 100% Job Oriented Site Engineer Control Panel Technician Course under the aegis of National Skill Development Corporation of India (NSDC).

About The Course: – This Course is specifically planned for the trainee’s with background of ITI. This course is a practical ‘Hands-On’ Training on wiring Drawings of control panel, Commissioning of control panel, PLC and HMI components, AC Drives and soft starters, Motors generators, electrical switches, safety etc. Course also includes Personality Development, Resume Develop, & Mock Interview Sessions.

Course Coverage:

Understanding Basics of Electrical & Electronics
Wiring Drawings of Control Panels
Electrical Safety
Wiring a Control Panel/strong
Identifying Faulty Components
Basic PLC & HMI Components
Fundamentals of Motors, Generators & Starters
Basics of AC Drives & Soft starters
Professional Skills
Co-ordination & Communication Skills
Workplace Health & Safety
Workplace Asset Management

Apply now

NSDU_IconJob Oriented Access Controls Installation Technician Courses under NSDC

Category: – 100% Job Oriented Building Automation Technician Course under the aegis of National Skill Development Corporation of India (NSDC).

About Building Automation Technician Course: – Technician courses are intended specifically for the students with a background of ITI. This course provides complete industrial knowledge and hands on training for the installation of Building automation and management systems. This course includes practical installation procedures followed by industries for Access Control Devices such as Biometrics, RF/ID Cards, CCTV Components, Fire alarm and Detection devices, HVAC components and control panels. Course also includes Personality Development, Resume Develop, & Mock Interview Sessions.

Course Coverage:-

Understanding Basics of Electrical & Electronics
Installation & Commissioning of Access controls
Wiring Drawings of Access Control Panels
Electrical Safety
Tools & Equipment
Wiring an Access Control Panel
Identifying Faulty Components
Customer Interaction
Professional Skills
Co-ordination & Communication Skills
Workplace Health & Safety
Workplace Asset Management

Apply now

NSDU_IconJob Oriented CCTV Installation Technician Courses under NSDC

Category: – 100% Job Oriented Building Automation Technician Course under the aegis of National Skill Development Corporation of India (NSDC).

About Building Automation Technician Course: – Technician courses are intended specifically for the students with a background of Diploma/ITI. This course provides complete industrial knowledge and hands on training for the installation of Building automation and management systems. This course includes practical installation procedures followed by industries for Access Control Devices such as Biometrics, RF/ID Cards, CCTV Components, Fire alarm and Detection devices, HVAC components and control panels. Course also includes Personality Development, Resume Develop, & Mock Interview Sessions.

Course Coverage:-

Understanding Basics of CCTV Systems
Wiring Drawings of Access Control Panels
Electrical Safety
Customer Interaction
Professional Skills
Tools & Equipment
Wiring CCTV Components
Identifying Faulty Components
Installation, Testing & Commissioning of CCTV
Co-ordination & Communication Skills

Apply now

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Courses after Diploma

After completing Diploma of Engineering, students get confused to choose their career; there is a huge opportunity for the students of Diploma in Industry. What they require is just a practical touch of Industrial requirements to get started. Even after getting diploma in Engineering, students lack to have practical knowledge as per industry norms. Sofcon provides that finishing & train the students to be easily grasped by Industries across the globe. In affiliation with NSDC Sofcon Provides a number of technician courses specifically designed as per the needs of Industrial requirements. The course details specifically designed for Diploma students are described below: -

JOB ORIENTED Maintenance Technician(Electrical) Training under NSDC

Category: – 100% Job Oriented Site Engineer Control Panel Technician Course under the aegis of National Skill Development Corporation of India (NSDC).

About Diploma Course: – This course provides exposure in planning and execution of Electrical System and Networking in Industrial Environment. This course comprises maintenance of Electrical wiring and drawings as per site requirements and enhance troubleshooting ability. This course is a practical ‘Hands-On’ Training on Planning and maintenance activity, Understanding operating manuals, Process documentation and records, wiring Drawings of control panel, PLC and HMI components, AC Drives and soft starters, Motors generators, electrical switches, Different Cable specifications,electrical safety measures, Troubleshooting etc. Course also includes Personality Development, Resume Develop, & Mock Interview Sessions.

Course Coverage:-

→Understanding Basics of Electrical & Electronics
→Wiring Drawings of Control Panels
→Electrical Safety
→Tools & Equipment
→Maintaining a Control Panel
→Cable Glands (Single Compression /Double Compression)
→Testing Pushbuttons, Indicating Lamps & Selector Switches, Limit
→Switches,Proximity, Switches etc
→Identifying Faulty Components
→Basic PLC & HMI Components
→Fundamentals of Motors , Generators & Starters
→Basics of AC Drives & Soft starters
→Workplace Asset Management
→Concepts of Maintenance & TPM
→Co-ordination & Communication Skills
→Workplace Health & Safety

Apply now

Save


Online Registration